1 data sheet ! note: 1. this datasheet is downloaded from the website of murata manufacturing co., ltd. therefore, it?s speci? cations are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. 2. this datasheet has only typical speci? cations because there is no space for detailed speci? cations. therefore, please approve our product speci? cations or transact the approval sheet for product speci? cations before ordering. http://www.murata.com/ 1 noise suppression products/emi suppression filters > emifil r (capacitor type) > single circuit type for signal lines 2012.7.5 o this data sheet is applied for chip emifil r used for general electronics equipment for your design. emifil r (capacitor type) single circuit type for signal lines nfm21c series (0805 size) c dimensions 0.30.2 (1) (3) (2) (2) 1.250.1 2.00.2 0.60.2 0.850.1 +0.2 C0.1 0.2 (in mm) : electrode c insertion loss characteristics (main items) frequency (mhz) 0.1 1 10 100 1000 6000 100 60 80 40 20 0 (50 - 50 ) insertion loss (db) nfm21cc101u1h3 nfm21cc220u1h3 nfm21cc470u1h3 nfm21cc221r1h3 nfm21cc471r1h3 nfm21cc102r1h3 nfm21cc222r1h3 nfm21cc223r1h3 c equivalent circuit input (output) (1) output (input) (3) (2) gnd no polarity. c packaging code packaging minimum quantity d 180mm paper tape 4000 b bulk(bag) 500 c rated value ( p : packaging code) part number capacitance rated current rated voltage insulation resistance (min.) operating temperature range nfm21cc220u1h3 p 22pf 20% 700ma 50vdc 1000m ohm -55 to +125c nfm21cc470u1h3 p 47pf 20% 700ma 50vdc 1000m ohm -55 to +125c nfm21cc101u1h3 p 100pf 20% 700ma 50vdc 1000m ohm -55 to +125c nfm21cc221r1h3 p 220pf 20% 700ma 50vdc 1000m ohm -55 to +125c nfm21cc471r1h3 p 470pf 20% 1000ma 50vdc 1000m ohm -55 to +125c nfm21cc102r1h3 p 1000pf 20% 1000ma 50vdc 1000m ohm -55 to +125c nfm21cc222r1h3 p 2200pf 20% 1000ma 50vdc 1000m ohm -55 to +125c nfm21cc223r1h3 p 22000pf 20% 2000ma 50vdc 1000m ohm -55 to +125c number of circuit: 1 continued on the following page.
2 data sheet ! note: 1. this datasheet is downloaded from the website of murata manufacturing co., ltd. therefore, it?s speci? cations are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. 2. this datasheet has only typical speci? cations because there is no space for detailed speci? cations. therefore, please approve our product speci? cations or transact the approval sheet for product speci? cations before ordering. http://www.murata.com/ 2 noise suppression products/emi suppression filters > emifil r (capacitor type) > single circuit type for signal lines 2012.7.5 o this data sheet is applied for chip emifil r used for general electronics equipment for your design. continued from the preceding page. c ! caution/notice ! caution (rating) do not use products beyond the rated current and rated voltage as this may create excessive heat and deteriorate the insulation resistance. notice solderability of tin plating termination chip might be deteriorated when low temperature soldering pro? le where peak solder temperature is below the tin melting point is used. please con? rm the solderability of tin plating termination chip before use.
|
